Characteristics :
  • • Professional LED lighting fixture for renovation and new construction
  • • Production & development entirely in the Netherlands
  • • Luminaires built with only components of the highest attainable quality
  • • Ceramic Cree high-power LEDs
  • • Reliable Meanwell HLG transformer
  • • Extremely long service life, L90B10> 109,000 burning hours (only 10% light loss)
  • • Luminaires produced according to project specifications
  • • Available in 240 or 480 watt versions
  • • IP65, optional IP67 possible

Product benefits:
  • • Unprecedented service life with minimal maintenance
  • • Very low "total cost of ownership"
  • • Minimum glare due to the use of LED optics
  • • Fewer luminaires required due to extremely low lumen drop
  • • Light output at least> 90% over the warranty period
  • • Is eligible for the Energy Investment Allowance 2019 (EIA)

Guarantee :
  • • 5 years warranty
  • • Warranty on both LEDs and transformer

 

View products

Cygnus Series 240 Watt
Cygnus Series 240 Watt
Cygnus Series 480 Watt
Cygnus Series 480Wat

Description

Cygnus Series
From open areas, parking spaces to facade façade. The Cygnus Series is designed to meet a wide range of floodlight applications. Existing inefficient floodlight systems can easily be replaced by the Cygnus Series. Existing light towers and connection points can be used 1: 1 again. Thanks to the high energy saving, which can be as high as 70 percent, the long service life and the minimum light consumption, an investment in the Cygnus Series is recovered in no time.

Exceptional quality
The Cygnus Series is produced entirely in the Netherlands. By using only components and parts of the highest attainable quality, the Cygnus Series distinguishes itself with an exceptionally long service life, minimal light consumption, high energy efficiency and very high light quality. While other LED luminaires have 30% light reduction at less than 50,000 burning hours, the Cygnus Series only has 10% light reduction at more than 109,000 burning hours.


Ceramic LEDs
For economic reasons, LED luminaires in the current market are often equipped with LEDs made of plastic. The plastic in this "cheaper" LED serves as a reflector and heat conductor for the internal LED chips. However, the LED is not resistant to the higher temperatures that arise in applications with a lot of light. Higher temperatures in combination with the heating and cooling cycle will cause the plastic to become brittle and discolored over time, greatly reducing the reflection. As a result, the LEDs quickly lose their initial light intensity. This process, depending on the total heat management of the complete luminaire, can ensure that even within a few years, the luminaires are due for replacement because the light intensity is no longer sufficient or that luminaires fail due to a defective LED circuit.

The Cygnus Series is equipped with a large number of CREE High-power LEDs. The basis of these LEDs are made of a ceramic material. High temperatures and the conversion of energy to light have no influence on the ceramic. These LEDs also have no reflector that can age. These high-quality LEDs are mounted on a printed circuit board consisting of 99.6% pure aluminum, so that the LED can quickly transfer its generated heat to the aluminum housing. This engineering allows the ambient temperature to cool the entire fixture well.

Project photos

Reference
×
 

Reference

Reference
×
 

Reference

Reference
×
 

Reference

Reference
×
 

Reference